- The flow
meter can be placed anywhere within the liquid cycle.
Accurate
monitoring and fast response:
- Transparent
cover clearly shows the movement of the coolant.
- Sensitive
probe provides most accurate water temperature
- Digital
monitor shows water temperature and provides overheating warning alert.
Easy installation:
- The quick
install connector of flow meter is suitable for tubing of ID9.5mm(3/8�)
Detailed
information
Clearly
shows the movement of the coolant
Quick
Install Connector
Application- Install Flow TX Plus with
Thermaltake BigWater 735
Flow
TX plus
CPU
waterblock of Big Water 735
12cm
radiator of BigWater 735
Liquid
tank of BigWater 735
P400
pump of BigWater 735
There
are two temperature shown on the screen (T1, T2).
T1 always mean pre-setting temperature as well as
T2 representatives the temperature from sensor.
ON / OFF: power on or power off switch. C/F : Celsius and Fahrenheit display switch.
RESET: clean the temperature setting. (MAX &
MIN) REC: Please adjust the pre-setting temperature
by using the cross-head screw driver.
Whatever it shows the temperature you would like to set, ( the
screen should be shown without MIN or MAX, see fig 1), please
press the button "REC" to record the temperature.
NOTE: When the screen is shown MAX, it means the highest temperature
you have recorded. In the meanwhile, T1 is the highest temperature
you set, T2 is the highest temperature that the sensor detected.
NOTE: When the screen is shown MIN, it means the lowest temperature
you have recorded. In the meanwhile, T1 is the lowest temperature
you set, T2 is the lowest temperature that the sensor detected.
