If the LCD panel is beeping ,please
follow the steps to check the situaiton
1.
The liquid level
may be below the low markremember to refill the coolant .
2.
The
system's temperature may be higher than the alarm temperatureremember
to check the liquid cooling system is running smoothly without error Remember
to plug the temperature sersor and liquid level sensor no matter which one
of the funcition is used .
May not be compatible with
coolant other than coolant provided by thermaltake
Compatible
with Thermaltake L.C.S( Liquid Cooling System) and components
Liquid temperature
and level monitor in the 5.25" drive bay.
Easily monitor
the liquid temperature and level from LCD panel in the front.
Built-in
liquid temperature and level alarm.
The signal
will flasherror beeps will occur and the LCD panel will change colors
from
blue to red when the coolant is below the "low" mark.
The LCD
panel will change colors from blue to red if the temperature of the
system
is higher than the set alarm temperature.
Fast response
probe:
Temperature
probe can detect the water temperature in real-time.
Liquid
level probe can detect the coolant level in real-time.
User Friendly:
The temperature
probe can be put at anywhere within the LCS loop
Quick Install
Connectors:
The temperature
probe connector is suitable for tubing of ID 6.4mm(1/4)/9.5mm(3/8)
5.25
driver bay temperature and liquid level display panel
350
CC liquid tank with liquid level sensor
Temp.
probe for ID 6.4 mm(1/4) and 9.5mm(3/8) tubing with temperature
sensor
Quick
install connectors for ID 6.4mm(1/4) and ID 9.5mm(3/8)
Functions
of LCD panel
ON/OFF
Power
on or power off switch
Water
temp:
The
current temperature of your liquid cooling system.
Alarm
temp:
The
alarm temperature that you have set
Alarm
set:
Reset
the alarm temp
RESET:
Press
the bottom to stop the error beeps and the signal flash
if the liquid level is below the low mark
°
C/ ° F:
Celsius
and Fahrenheit display switch
Low
water:
The
signal will flasherror beeps will occur and the LCD panel
will change colors from blue to red when the coolant is
below the "low" mark.
Monitor
switch:
Note: When the liquid level is below the low mark , the
signal will flasherror beeps will occur and the LCD panel will
change colors from blue to red for ten minutes if you do not press
the RESET button.
Note:
When the water temperature of your system is higher than
the setting temp., error beeps will occur and the LCD panel will
change colors from blue to red.
Recommendation
These
are the recommended locations for the placement of the LCD paneltemperature
probe and liquid tank
Outlet
of CPU waterblock
Outlet
of radiator
Outlet
of liquid pump
Apply
to Thermaltake BigWater 735 and Armor chassis for optimal thermal
solution
These
are the recommended locations for the placement of the LCD paneltemperature
probe and liquid tank
12cm
radiator
CPU
waterblock
P400
liquid pump
350cc
liquid tank
Temp
probe
5.25
driver bay temperature and liquid level display panel
a. Functions
of LCD panel
Dimension
of the mounting plate
14.9(H)
x 4.1(W) x 6.5cm(D)
Sampling
rate
1
sec
Water
temp. range
0°C
~ 95°C
Resolution
0.1
°C
Accuracy
+/-
1 °C
Display
Constant/Real
time
Temp
alarm setting range
40
° C ~ 90°C+/- 5 ° C
Temp.
normal status
LCD
with blue light
Temp.
and liquid level alarm warning
LCD
with red light
The signal will flash and error beeps will occur when the coolant is below
the "low" mark
b. Capacity
of liquid tank
350
cc
c. The
temp. probe
Swiftly
read the temperature of your system
d. Quick
install connectors
-
for ID 6.4 mm(1/4) tubing
- for ID 9.5 mm(3/8) tubing
If the LCD panel is beeping ,please
follow the steps to check the situaiton 
