Introduction
Excellent thermal conductivity
Ideal for heatsinks, cut-to-size

Akasa double-sided thermal adhesive tape is a highly effective thermal interface designed for bonding heatsinks to chipsets or other components requiring strong fixing in a hot environment.

Note: Provides semi-permanent bonding, not design for quick removal, not recommended for CPU / GPU usage.

Specification
Colour: White
Size: 80x80mm
Thermal conductivity: 0.9 W/m. °C
Tickness: 0.30mm
Peel adhesion: 1200g/inch2

Installation
1. Ensure both surfaces are completely clean and free from oil or other contaminants.
Clean with Isopropyl or Akasa TIMclean

2. Cut tape to size.
Remove yellow protective liner from one side and apply to device using moderate pressure.
Remove orange protective cover from the other side and carefully position the device in place using moderate pressure
Take care to position the device correctly first time. The device can be used immediately after bonding.

3.Unused tape can be stored safely at room temperature in a dry environment .

Review
FrostyTech
“A lot of times there are no through-hole mounting points on the motherboard, so there aren't really any other options. Akasa's AK-TT12-80 material is appropriate for these situations” more..